球探网即时比分007

You are here: Home » Information » Machinery and Equipment »Text

Inverter belt coal feeder GLD800 / 5.5 / B hanging type

Enlarge fontReduce font Release date: 2019-12-30 Views: 0
Core tip: Coal feeder is the star product of Dongda. Dongda started from producing coal feeder. It has more than 20 years of production experience. At present, the types of coal feeder are: A belt coal feeder, belt coal feeder , Reciprocating coal feeder, chain coal feeder and weighing coal feeder. Dongda's coal feeder has also been

20多年的生产经验,目前给煤机的种类有:甲带给煤机,皮带给煤机,往复式给煤机,链式给煤机和称重给煤机。 The coal feeder is a star product of Dongda. Dongda started from producing coal feeders. It has more than 20 years of production experience. The current types of coal feeders are: coal belt feeder, belt coal feeder, reciprocating Coal feeder, chain coal feeder and weighing coal feeder. Over the years, Dongda's coal feeders have been continuously improved, and the types have been continuously increased, striving to achieve perfection and meet the requirements of all customers.

18053792683张焕真(同微信) Dongda Coal Feeder Sales Hotline: 18053792683 Zhang Huanzhen (same as WeChat)

K型往复式给煤机的单向给煤,大大的提高了工作效率并且采用了16Mn合金铸造的链节作为工作面提高了设备的使用寿命并用尼龙棒销联接此结构具备了很强的耐冲击性。 The belt-belt coal feeder uses a motor cycloid pin gear reducer, which has a compact structure, stable operation, and a wide range of speed adjustments, which can achieve stepless speed regulation; endless rubber belt transmission. The endless rubber belt is redirected to the expansion pulley. The adjustment of the tensioning device can adjust the tightness and deviation of the belt. Because of the use of a ring mechanism, the continuous coal feeding is different from the one-way coal feeding of the K-type reciprocating coal feeder, which greatly improves the work efficiency and adopts The 16Mn alloy cast chain link as the working surface improves the service life of the equipment, and the structure is connected with nylon rod pins with strong impact resistance.

During the working process of the belt feeder, it is necessary to regularly check the operation of each component:

Belt type coal feeder

● Whether the fastening bolts are loose

● Is there any abnormality in the roller rotation?

● Whether the belt is off

Once an abnormality is found in the transmission, especially if abnormal noise is heard, the cause must be identified and dealt with in a timely manner, and the transmission must be used correctly and regularly maintained.

● When installing the sprocket on the output shaft, do not hit it hard. Use the screw holes at the outer end of the output shaft to screw in and press in the sprocket.

● When the MB stepless speed changer is delivered from the factory, the speed adjustment limit screw has been adjusted to the extreme position, and it must not be adjusted at will to avoid damaging the parts.

● MB stepless speed changer is suitable for forward and reverse two-way operation. The input motive power can start up to 5 times per minute. The higher starting frequency adversely affects the service life of the speed changer.

The MB stepless speed changer can only adjust the speed when it is turned on, otherwise the parts will be damaged.

MB stepless transmission must be added with the specified traction fluid (Ub-1 or Ub-3 traction fluid) before use, and the liquid level must reach near the center line of the oil mirror; after 300 hours of operation, the traction fluid should be replaced. Replace it after working for 1000 hours, and then change the traction fluid every 1500 hours.

The working temperature of MB stepless speed changer shall not exceed 40 ℃, and the surface temperature shall not exceed 75 ℃.

● MB stepless speed changer should not stay at a fixed speed for a long time. It is recommended to adjust the speed every 500 hours of operation.

18053792683张焕真(同微信) Dongda Coal Feeder Sales Hotline: 18053792683 Zhang Huanzhen (same as WeChat)

During the overhaul, first close the gate, then suspend the bracket as a whole, and open it for maintenance. However, after re-installation and positioning, it is necessary to check whether the position of each piece is correct, and after no-load commissioning, it can be put into use.

In addition, the company also wholesales and retails coal feeder accessories including: belts, belts, chains, sprocket wheels, motor reducers, tensioning devices, rollers, idlers, secondary seals, traction fluids, etc. Welcome new and old customers to come to consult!

[ Information search ] [ Add to favorites ] [ Tell a friend ] [ Print this article ] [ Report violation ] [ Close window ]

条[查看全部]相关评论 A total of 0 [View All] Related Comments

Recommended Photo
Recommended information
Click Ranking
Industry AssociationRecord informationTrusted website